NEEWER Pictures 4 Curler Wall Mounting Guide Background Assist System with 2 x 4 Fold Hook, 8 x Develop Bar, 4 x Chain, Load Capability per Curler: 22lb/10kg

Not much to dislike
Well for the price this thing is pretty sturdy and gets the job done most of the time you will not need to put so much force onto this and the weight of the roll isn’t enough to really make a huge difference in how well this can hold its roles of paper.I’m not entirely sure if I explain that right but to get down to it you can well make your money back with a shoot or two.It holds my seamless white backdrop that is 86 in Long with ease I haven’t had a problem with the rollers or the plastic chain that it comes with one thing I would take into consideration is having someone to release the rolls tensioner to keep it in place and tighten it back up when you’re done taking the amount of roll you want out so it doesn’t over roll when you’re by yourself you’ll know what I mean when you do it.

Great purchase, for the price
Let me start off this review by reflecting on what my mother use to tell me, “you will usually get what you pay for”. First, I always read the poor reviews and then go back and read the good reviews. This help me to give weight to the poor reviews as to their accuracy. For all those complaining that the chain is plastic, I must say this, this is a $70 system and not a $600 or $1,000 high end commercial system. Really, what did you expect.Once mounted to my studios wall, my system is holding 3 107” x 24’ rolls of paper and 1 107” x 24’ vinyl roll. Consideration for what you are mounting, and its weight is vital to your mounting options.First let’s start with the mounting. Unless you have concrete walls, or you are going to mount this to a concrete floor, through away the mounting hardware. The hardware included with the kit is only meant to be used with solid concrete. The mounting brackets are drilled for all sorts of mounting options which I consider to be a big plus. Mounting to just sheetrock was not an option. I don’t care how many sheetrock screws you put in, sheetrock is not very strong and will weaken over time. After measuring I found that my studs were just a little to far apart. After consideration of putting up cross studs between two studs I discovered that if I only used the 4-outside hole on the brackets (they have 4 holes along each side and 2 holes in the middle of the bracket) and set the roller inserts to their max, the spacing was suitable for mounting the brackets directly to the studs. Using 3 ½” wood bolts (3” into the stud, drill piolet holes) I believe that my brackets will hold a couple of hundred pounds each. I did drill out the bracket holes just a little to accommodate a little larger bolt. Sense after I spent days coming up with this solution, I discovered that if you transfer your paper, vinyl to a piece of 2” PVC, you can cut the PVC to any length you want. This would allow you to mount to the studs where ever they are. I discovered this because I had to transfer the vinyl to PVC. Not because of its length but, because its center core was not big enough to accept the roller inserts.Now let’s get to using the system. The plastic chain is functional if you remember that it is plastic and not steal. You can’t go pulling on it like you’re lifting a garage door or speed rolling. I found that I don’t have to use the roller restrictor/locks for the paper rolls. This makes it much easier (less tension on the chain) to roll up the paper rolls. The vinyl is a whole different story as it is much heavier. First off, it’s to heavy for the plastic chains, they will break. You must tighten down the restrictor/lock so tight to keep the weight of the vinyl from unrolling the whole roll you can’t roll it back up. After trying it I ordered the backdrop holder for 42lbs with metal chain. Yes, it’s almost as much as the whole mounting set but, if your going to use 107” vinyl your going to need it. I also put a screw hook into the stud where the chain is. I unroll the vinyl and put the chain on the hook to hold the roll. This allows me to not have to tighten the restrictor/lock down which makes it easier to roll the vinyl back up. If you use a smaller (much smaller) roll you may not need to purchase the heavier holder. Try it with what comes with the kit and if you find it’s not suitable, order the heavier holder. If you’re going to use all vinyl, purchase a different system, this one is not heavy enough.All in all, considering the price and despite some of the issue, I am very satisfied and happy to give this product a 5-star rating.

Soooooo happy with it!
Got three colors of seamless paper, so urgently need such a product! This setting is really affordable, especially you can buy everything you need at once purchase. It is very well installed, although it has a lot of parts, here I would like to recommend the seller to give an extra screw (it is really easy to lose). I am sorry that it has to be punched in the wall before it can be installed, feel bad about the wall just brushed:-( But it’s quite solid, I put all three seamless cloths on it (you have to admit that they are heavy), it works perfectly. Love it!

OK,a MUST have
It’s easy to install, and it still works great after half a year. I installed four backdrops, so the color-coded chain sometimes bothered me, but everything was made very well and durable (the chain was much stronger than I thought). I will keep this for a long time. Of course, I think you can get a better one if you are willing to spend more money. So far, I am very happy with everything about it. Recommended for people with low budgets.

Was easy to hang up and looks great once done.

Muito bom pelo preçoMais fraco que um manfrotto as correias são mais finas e parece me menos resistentesMas custou me 85 euros o manfrotto custou-me 300Vale a pena Voltaria a comprar