KDD Pill Stand Holder with 360° Cellphone iPad Tripod Mount, 27in Lengthy Arm Webcam Stand Projector Digicam Mount for Desk, Match for 4.7″-13″ Gadgets, iPad Professional 12.9 Air Mini, Galaxy Tabs, Change, iPhone
Original price was: $29.95.$24.95Current price is: $24.95.
Worth: $29.95 - $24.95
(as of Jan 21, 2025 17:59:18 UTC – Particulars)
From the model
【Assist Peak and All-Angle Adjustment】Essentially the most revolutionary design of the KDD iPad stand is that every bracket rod might be fast adjusted to realize horizontal or vertical 360-degree rotation and 180-degree bending to fulfill any angle and place you want. Max Peak 27 inches. The pill stand can be outfitted with a sturdy steel ball head for double adjustment, permitting you to regulate the units to one of the best angle.
【Fastened Joint Design with Gears】Are you continue to utilizing bendable snake arms and swing arms that may transfer and fall over time on account of gravity? Our iPad mount with fastened gears can resolve all of your worries! Simply flip the knob to regulate after which tighten the fastened gear with glorious load-carrying capability as much as 3.5 lbs. Tremendous protected and secure to your valuables.
【Common Compatibility & Case Pleasant】KDD iPad desk stand has giant jaw opening(4.7-9.8 inch), match for all 4.7″-13″ cellphones and tablets with or with no case/sleeve, suitable with iPad Professional 12.9/ 11/ 10.5, iPad eighth Gen, iPad Mini, iPad Air, Microsoft Floor Professional collection, Samsung Galaxy Tab collection. Common 1/4″ screw is suitable with Webcam Brio 4K, C925e, C922x, C930e, C920S, C960, C615, digital camera, GoPro Hero 9/8/7/6/5, projector, ring mild and many others with commonplace 1/4″ screw gap.
【Stronger Anti-Scratching Clamp】The digital camera stand with an adjustable clamp base can open max to 2.2 inches. The clamp with sponge pad and we offer 2 further rubber pads to guard your furnishings from scratch, permitting you to securely clamp it on the desk, desk, mattress headboard, nightstand, kitchen counter and many others. You too can carry the webcam stand wherever since it’s folded and intensely transportable to hold.
【Simple to Use & Finest Worth】Simple set up inside minutes, simply a number of steps for meeting. We offer a regular consumer information so that you can make set up as simple & handy as attainable, when you’ve got any drawback, please be happy to contact us by way of Amazon message or e-mail for assist and we’ll guarantee your satisfaction. Bundle consists of: 1xAluminum Alloy Stand, 1xDesk Clamp Mount, 1xMetal Ball Head, 1xTablet Holder Mount, 2xRubber Pads, 1xUser Information.
Prospects say
Prospects discover the transportable digital system stand purposeful and adjustable. They respect its versatility, swivel angle, and ease of meeting. Nevertheless, some clients have differing opinions on the construct high quality, how securely it holds units, and the way simple it’s to clamp.
AI-generated from the textual content of buyer opinions
11 reviews for KDD Pill Stand Holder with 360° Cellphone iPad Tripod Mount, 27in Lengthy Arm Webcam Stand Projector Digicam Mount for Desk, Match for 4.7″-13″ Gadgets, iPad Professional 12.9 Air Mini, Galaxy Tabs, Change, iPhone
Add a review
Related Products
![Stylus Pen [10 Pack] Universal Capacitive Touch Screen Pens for Tablets, iPad Mini, iPad Pro, iPad Air, Smartphones, Samsung Galaxy – Multiple Colors](https://m.media-amazon.com/images/I/714uJV2cRWL._AC_SL1500_.jpg)
![Fintie Common Pill Hand Strap Holder – [Dual Stand Supports] Removable Padded Hook & Loop Fastening Deal with Grip with Adhesive Patch for iPad/Galaxy Tab and All 7-11″ Tablets, Black](https://m.media-amazon.com/images/I/71YY9cREDHL._AC_SL1500_.jpg)
Original price was: $29.95.$24.95Current price is: $24.95.
JT –
Love this stand!
I bought this to hold my iPad on my treadmill. It is clamped to the vertical leg on the treadmill and is adjusted so that the iPad is at eye level when using the treadmill. I added put a bungee around the support bracket and leg for extra support as it fell off the first time I mounted it because I did not tighten the clamp correctly. The rubber pad must go beneath the round screw in the support bracket, not beneath the other side of the bracket (which already has a thin pad on it). The sections of the mount are adjustable 360 degrees by loosening, adjusting the tubes and retightening the threaded collars. Once everything is tightened snugly, the mount is quite stable. I have mine almost fully extended. I added a 2nd bungee that hold it tightly to the back of the treadmill to prevent vibration.I am impressed with the quality of this mount. It is very well made from all aluminum (except for the thumb-screw heads and a collar). The iPad is held tightly and securely by spring clamps on the long side of the iPad and has a space to plug in the charging cable. I almost bought one of the gooseneck mounts and am so glad that I spent a few dollars more and got this far sturdier mount. While it is easy to adjust, it might be a bit cumbersome and not be ideal where one would want to constantly adjust the iPad. For a set and leave it application, it would be great.
Joe –
Creates a more productive working space.
I have one for each of my iPads and one for my iPhone. It requires a little learning curve for me at least adjusting them so that I can see each of them. It allows me to get them up off the desk and saves a lot of frustration because Iâm always rearranging the cords or tipping over their old stands. It is also giving me about half of my desk back.I am able to touch my screens and process whatever Iâm working on but what are usually go ahead and grab a hold of them just to keep them sturdy as they kind of bounce a little bit. There are three joints all independent in the tubes can turn as well when adjusting them. I imagine just about any configuration as possible however can be frustrating as you hold it in place and tighten it it may move into place maybe lower than you wanted. The last one I tried to use had a gooseneck on it but you would think itâs very easy to adjust however you have to hold onto it with one hand and adjust it with the other mine lasted for only a few moments before I busted it in several pieces. I have mine mounted on the side of my desk and I can turn sideways to my desk and have them stretch out over me while I lean back in my comfortable office chair lol I will probably buy more
Brian F. –
Good support system,works for second monitor
After buying a second small monitor. It didnât come with a stand. Pretty happy with this setup itâs nice and strong.
Christofer Klocke –
Not the best but not the worst
Iâm using this in my van and I had several issues come up that others have mentioned:The ball joint is prone to wearing out and becoming unusable- thereâs two screws that tighten this and one of them is an Allen screw so I think if you lock it into place tightly and leave it there it will be fineOne of the elbows broke at the gears but this could be from me changing position so many times and the vibrations in the vanThe arms loosen easily and donât bite down super tight so not great in the vanIâm buying a second one because itâs still better than the other stands Iâve tried. Just adjust everything and check on it once in a while and it should be fine.
Judy –
Really Solid and Professional
I use my tablet computer to record video for online classes I teach and as a camera lucida for creating precision drawings. For both of these purposes I need to position the tablet precisely and then lock it securely in position. I have tried a number of other stands and have tried using stuff around the house to hold the tablet with poor results. This stand is worth it. It is solid and well made. The spring loaded holder for the tablet (or phone) is easy to use and fits a wide range of sizes.All that said, let me offer some advice. The instructions that come with the product are a little incomplete. First of all, they are fairly specific about how to put the components together up until the point where you need to attach the part that holds the device to the stand. The instructions tell you to do that, but don’t tell you how. It turns out that there is a rubber nut on the end of the stand that needs to be unscrewed and removed (it does not look like it should be removed). When you remove it, there is a screw inside that fits inside of the device holder head. Once you get that done, spend some time looking at the parts of this and understanding how they bend in relation to each other. One thing I did not initially understand was the knurled rings around the long rods of the stand. I wondered if they telescoped the rods, but that turned out not to be true. They do allow you to turn the rods if you loosen the ring. That is useful when positioning the tablet, but watch out because they are full of lubricant that will get on your hand. Depending on the weight of your device, you need to arrange the arms of the stand to get a reasonable balance, which takes a bit of practice, but that would be true with any of the stands out there.
Emaciated Clown –
Broke in 2 Days
This mount was so close to being good, but it wasnât. How can something be simultaneously be too tight and too loose? The answer: I donât know but this mount is the perfect example of just such an object. This thing was so annoying to try to adjust that as I was trying to unmount my iPad so that I could repackage this to send it back, the plastic ball joint broke from two days of torque trying to get this thing adjusted just right. Why both ball joints werenât metal is not just ill conceived, but ill advised. My only wish is that I could send this back twice since my reasoning for doing so doubled in about ten seconds flat.
Ivan p. –
Cumple su funcion
NKD –
This is working for us at the moment. IT is quite sturdy and stable when put on a sturdy table. It is a little bit short, so some limitations on versatility, but it is working well for us a the moment.
Eva –
Wow justo lo que buscaba, querÃa algo para ver el iPad como televisor para la cama y para el escritorio y asà no forzar el cuello durante tantas horas. Parece de buena calidad porque pesa bastante, además puedes adaptarlo casi como quieras a cualquier posición y es muy estable. Me ha sorprendido para bien sin duda!
Ady –
Love this, good quality, had it like this for months and hasnât budged, well worth the money, easy to use and adjust, works well with my iPad Pro (canât remember which gen 2020 I think?)
derCyrano –
Ich wollte von meinem “oberen Keyboard” den Notenständer (für mein iPad) wegbauen, weil er die Sicht des Publikums auf mich zu stark behindert hat. Habe verschiedene Halterungen probiert: entweder die Arme waren zu kurz um von meinem Keyboard-Ständer über das obere Keyboard zu reichen oder zu instabil (teilweise total wackelig) oder ungenügend verstellbare Achsen.Dieser geht zwar auch nur senkrecht zu montieren (waagerecht am Holm war er auch zu wackelig) aber er reicht in verschiedenen Montage-Versionen immer locker über das obere Keyboard und hält meinen Wischgesten auf dem iPad locker stand. Und er behält seine Position auch nach Tagen (dies ist nicht unbedingt selbstverständlich!).Fazit:- nicht ganz billig aber- wertige, solide Verarbeitung- die Kugelgelenke sind leicht zu verändern und halten ohne Werkzeugeinsatz sehr gut fest- die beste Ausführung von drei annähernd gleich teuren iPad-HalterungenKlare Kaufempfehlung