9.8″ Adjustable Magic Arm w Clamp, Articulating Magic Arm Digicam Clamp Mount w 1/4″ Thread, Overhead Telephone Mount, Versatile Desk Digicam Mount & Clamps for Tripod Monitor LED Mild Webcam Microphone
Original price was: $24.98.$23.58Current price is: $23.58.
Worth: $24.98 - $23.58
(as of Jan 19, 2025 09:30:38 UTC – Particulars)
From the model
JEBUTU
Your Greatest Images Associate
JEBUTU is knowledgeable enterprise devoted to the manufacturing and manufacture of photographic equipment.
With our love for the pictures and chronic pursuit of expertise, we offer high-quality and modern photographic equipment for pictures lovers photographers world wide.
Why can we love what we do?
Our workforce is dedicated to repeatedly selling product innovation to fulfill new calls for and challenges of the market.
What makes our merchandise distinctive?
We strictly management each step of the method to make sure that each product reaches a top quality stage. We additionally endeavour to scale back the impression on the atmosphere in the course of the manufacturing course of.
What drawback are we fixing?
We deeply perceive the significance of each second in pictures. So we sit up for JEBUTU merchandise to accompany you in each second of pictures.
Picture Backdrop with Stand Equipment
Picture Backdrop Stand Equipment
Product Picture Backdrop Stand
Overhead Desk Digicam Mount
Magic Arm Digicam Mount Clamp
Double Clamp Mount
Digicam Clamp Mount
digicam mounts & clamps
Built-in Anti-deflection Design & Extra Steady: Magic arm and digicam mount clamp are built-in design on the connection level, which is non-removable to forestall deflection and enhance the soundness. Within the technique of utilizing, you need not fear in regards to the deflection loosening, and you may set the angle freely
360° Rotation & Versatile Angle Adjustment: Every finish of the 9.8 inch Magic Arm has a 360°rotatable ball head. The angle of the arm could be simply set by adjusting the middle T-shaped knob. The middle joint of the magic arm is designed with chrome steel gears, which may improve the locking drive and tremendously enhance the soundness
Adjustable Tremendous Clamp: The clamping width of Tremendous Digicam Clamp Mount could be adjusted from 15mm to 50mm by adjusting the T-Form Knob. digicam clamp could be firmly fastened on the flat or l objects comparable to: desk / chair /pipe / mild stand / tripod, and so on
Broad Utility: Magic arm digicam mount is designed with a normal 1/4″ screw, appropriate for DSLR digicam, video mild, ring mild, video monitor，safety digicam, smartphone mount holder, webcam, microphone,motion digicam,and so on. ②Clamp digicam mount is designed with 3/8 screw holes on the facet and 1/4 screw holes on the entrance, again and backside. A number of screw holes can be utilized to connect further photographic equipment
Cell Telephone Mount Holder: <1>There’s a 1/4 screw gap on the facet and backside of the telephone mount, which could be straight fastened on a ball head, tripod, mild stand and different units with a 1/4”screw. <2>The smartphnone clip is designed with anti-slip rubber to guard your smartphone from falling. <3>NOTE: This cellphone holder suits for any cellphone inside 2.2-3.5inch/5.8-9cm width
Bundle Content material & Be aware for Use: <1>Bundle included: 1x 9.8″ Magic Arm with digicam mount clamp, 1x Cell Telephone Holder <2> When you have any questions in regards to the high quality or the set up of the product, please be at liberty to contact us
Prospects say
Prospects respect the moveable digital machine mount’s strong construct high quality, performance, and maintain. They discover it really works properly for his or her units and offers a safe maintain in any place. Many think about it a very good worth for the cash. The adjustable design and ease of setup are additionally appreciated. Nonetheless, some prospects have differing opinions on the clamp high quality.
AI-generated from the textual content of buyer evaluations
8 reviews for 9.8″ Adjustable Magic Arm w Clamp, Articulating Magic Arm Digicam Clamp Mount w 1/4″ Thread, Overhead Telephone Mount, Versatile Desk Digicam Mount & Clamps for Tripod Monitor LED Mild Webcam Microphone
Add a review
Related Products
Original price was: $24.98.$23.58Current price is: $23.58.
Bill’s Workbench on YouTube –
Better than I thought
I wanted something a bit longer than the other arms out there. I used it for a different angle with my iPhone when recording my YouTube videos.When I first opened the box, I thought it would be a pain to have locks on every connection instead of one lock. In practice, it is not a big deal. Each connection has a rubber o-ring that grips the connection tight when you lock it in place. It’s very sturdy.I have not tried it with anything larger than an iPhone, so I don’t know how it will work with a larger and heavier camera. For the iPhone, it’s excellent, and I am happy I added this to my rigging setup.
Glen Rogers –
Good quality and locks into position
Great addition to my gear bag. Highly recommend.
Nicholas J. –
It mostly holds my phone in place.
I use this to hold a cellphone in place to act as a camera for a 3D printer. And it works well enough for that. I want to apologize in advance for any terms I incorrectly use regarding the arm.Pros:-The base clamp is very strong and grippy. I have never once worried about it slipping or loosening from vibration or force.-The phone is very secure in that clamp. The spring that pulls the two halves together is very strong and applies a lot of grip strength.-the configuration of the bars that make up the arm allow you put the arm is almost any position and largely keep it there.-lightweight and feels sturdy. I haven’t had any concern about damaging parts.Cons:-The nut that locks the arm in place on the clamp has not been reliable. It will tighten enough the arm won’t move much… unless you touch it, then slips very easily. The design of the clamp and nut doesn’t really allow you to tighten it enough to prevent this. Of all the joints l, this is the only one I have to constantly adjust.-there is a pin and hole that line up between the base clamp and the arm that do not fit well together. The pin is too small for the hole and allows quite a bit of rotation as a result. This, combined with the issue above, basically remove the usability and function of the quick connect between the arm and base, which was the reason I selected this one over others.-the phone clamp could use a bit of rubber or some other grippy material on the two halves. While the clamp holds the phone well, it’s still fairly easy to move to phone.Overall, it works well enough, but the few weaknesses mentioned hurt a lot of the functions I explicitly wanted it for.
ROB –
I love this thing
A very versatile piece of equipment. I’m only mounting light-weight LED light panels with it, so nothing real heavy, but seems sturdy enough for heavier things.This is one of those items you come across that feels worth it, when 95% of everything else is junk.
Sam –
Very solidly built magic arm!
I use this to mount a small camera over my desk. For that purpose this works perfectly.One thing to note is that the ball mounted to the clamp can get loose and it has to be screwed down. I thought I had a defective unit when my camera rotated down more than once. It wasn’t the friction “ball” clamp itself, but the ball mounted to the clamp that was loose, which needed to be tightened. Once I got that squared away, it works like a champ with no issues!
307à lïWóòD –
Valid design, Useful idea. Not so great on delivery
It’s a beautifully Constructed item for light camera/phone/mic/Tablet usage. Anything with weight wouldnât be useful or great. I hoped to use it with a classic blue Yeti Condenser Mic. The mic was too heavy for the item to hold in position for too long. Tablets wouldnât go well either due to weight. The rubber Plastic parts at the base and in the joints need to be redesigned. TSome are glued and wouldnât last more than two weeks of regular usage. Also, it’s not ideal if you want to move it a lot. It’s more of a stationary, forget-type device. You have to use it twice daily to move it back and forth into position for recording or what have you. Then, the joints give out after a few weeks. For me, it took about two weeks. You can see the rubber parts and washers that are given out on the joints.The metal portion is beautifully done. The blots and Metal parts are precise and beautiful .The idea is valid, very valid. It would be beautiful if it were tested to function correctly for Prolong usage, but just a quality check wasnât done for everyday use.If you guys look to improve it and would like to have someone check it, Or even share some improvement notes. Amen Contact me please.Most of the joints and attachments are 100% standard, Which is a beautiful thing. It comes with all the adapters for phone, camera, and mic Compatibility.3 stars for Construction of it.Could be a 5 star item if few Improvements were to be Implemented. ð¹ðð¹ð§
Ce –
Es de distancia corta, pero firme, se ve muy bien, los colores están muy bien.
TRUE_PRIME –
and for outdoor