Govee Water Leak Detectors 5 Pack, 100dB Adjustable Audio Alarm Sensor, Delicate Leak and Drip Alert, for Kitchen Rest room Basement (Battery Included)
Original price was: $49.99.$39.99Current price is: $39.99.
Worth: $49.99 - $39.99
(as of Dec 28, 2024 04:15:08 UTC – Particulars)
From the model
Govee is a worldwide main good dwelling model devoted to offering customized and enjoyable life experiences by way of steady improvements.
With the assistance of our good sensors and Govee Residence app, you’ll be able to get pleasure from a more healthy, safer and extra handy way of life.
Govee Water Sensor
Govee Meat Thermometer
Thermometer and Hygrometer
Govee Sensible Plugs
Dripping and Leaking Alarm: In addition to 2 teams of backwater detector sensor probes, every detector additionally has 1 group of entrance probes for pipe dripping.(Word: Solely paired with the gateway of the water detector, can’t paired with the gateway of the hygrometer.)
Wi-fi and Straightforward to Use: No wire or setup required, the mini measurement means that you can put it on anyplace the place the water leak could also be taking place. With package “B07QP153GT”, you’ll be able to monitor leaks in your telephone even you are not at dwelling.”B07QP153GT” not Included in Bundle.
Adjustable Alarm Audio: Every water leak detector options an 0-100 dB adjustable alarm audio. Loud sufficient to be heard even when leak occurs in basement, press the button to mute the sound while you discover the leaking place.
Low Battery Alert: The water sensor alarm will beep and flash a crimson gentle when a battery is low, or press the button on it to check the battery degree.
IP66 Waterproof: The utterly sealed waterproof design permits for prolonged use in excessive moisture areas.
Prospects say
Prospects recognize the product’s performance, leak detection, and simple setup. They discover it really works effectively for its options and value, offering peace of thoughts for flooding and water leaks. Many take into account it an excellent worth for cash, saving them cash and grief from a water leak. The telephone notification and water detection are additionally appreciated. Nevertheless, some clients have blended opinions on the alarm quantity and battery life.
AI-generated from the textual content of buyer critiques
13 reviews for Govee Water Leak Detectors 5 Pack, 100dB Adjustable Audio Alarm Sensor, Delicate Leak and Drip Alert, for Kitchen Rest room Basement (Battery Included)
Add a review
Related Products
Original price was: $49.99.$39.99Current price is: $39.99.
Gino Lee –
Excellent, with one significant caveat
Like swblake noted, the instructions for pairing, in the instruction manual are not correct. To pair a water sensor with a hub, assuming that you have already plugged the hub into an electrical outlet and successfully connected to the hub via the Govee app (Android/iOS), long press the lower button on the hub, for about 3 seconds. That will put the hub into pairing mode. Then, bring the water sensor very close to the hub (a few inches away), and long press the water sensor’s button for about 3 seconds. Give it another 5-10 seconds for it to finish pairing. From the lights, it’s pretty obvious when it’s paired successfully. Once it’s been paired successfully, you can then relocate the water sensor to your desired location.Interestingly, one of the water sensors actually detected an occasional, minor drip, that was occurring in one of my bathrooms, that I had not previously noticed at all.As a test of the battery levels, I replaced the batteries on one unit with older batteries, having a voltage of 1.17 volts each. I was pleased to note that when I refreshed the Govee hub app, it picked up that the battery level on that water sensor had gone down, from 5 bars to 2 bars.CAVEAT:I did another test where I removed the batteries entirely. Unfortunately, when I did this, and then refreshed the hub app’s device list, the water sensor, from which I had removed the batteries, still showed up in the list, with NOTHING to indicate that there was anything wrong with the water sensor. In fact, as an additional test, I left out the batteries for 30 minutes, and the Govee hub was UNABLE to detect that the water sensor was no longer operational..This is a problem because, if a water sensor suddenly dies, the user has NO WAY to tell that it’s died. And so they’re left in a situation where they think the water sensor is still working when it actually isn’t. This could very well result in a catastrophic situation where the user ends up suffering thousands of dollars in water damage due to this software fault.A better way to handle this situation is, if the Govee hub cannot detect a device, upon device list refresh, simply flag/highlight the device and, ideally email the user, regarding the water sensor that is no longer sending messages to the hub. Optionally, allow the user to specify the timeout duration, beyond which they want to receive an alert. For example, if the Govee hub hasn’t received a status update from a device within a 5 minute time period, have the Govee hub send an alert to the user regarding said device..Hopefully, Govee will push out an update to resolve this important issue.Getting notifications on my Android phone, when a water leak is detected is pretty awesome! I actually created a custom ringtone, of a dripping sound, to associate with water leak notifications. Which helps to determine that it’s a HIGHLY IMPORTANT notification..Getting app notifications, for water leaks, is a killer feature, for water sensors. Love it.And the idea of transmitting on 433 MHz frequency, to the Govee hub, instead of having each sensor connected directly via WiFi, is probably an excellent design decision, in terms of conserving, prolonging battery life, as direct Wifi connections would probably have required much bigger capacity batteries, due to their relatively higher energy requirements.
J. DeMotte –
worked well to alert us that our disposal was leaking
installed these only 17 days before our disposal started leaking. We have new cabinets and this, along with our under sink mat prevented damage to our brand new cabinets. It would have been several more hours before we might have noticed that water was accumulating under the sink. well worth the price. VERY simple to set up.
H. C. McIntyre –
CHECKS FOR WATER
LOUD ALARM WHEN WATER LEAK IS DETECTED WITH APP NOTIFICATION WITH MODULE AND THEY WORK. HAVE SAVED ME FROM MAJOR DAMAGE AND HAVING AN INSURANCE CLAIM WHEN WATER HEATER STARTED TO LEAK. I HIGHLY RECOMMEND THESE GOVEE WATER LEAK DETECTORS THAT HAVE A LONG BATTERY LIFE AS THESE SAVE YOU A LOT OF EFFORT AND MONEY WHEN YOU HAVE A WATER LEAK. PLACE THESE INEXPENSIVE DETECTORS AT EVERY PLACE THERE’S A POSSIBLE WATER LEAK, IT ONLY TAKES ONE UNNOTICED LEAK FOR A LOT OF DAMAGE – BUY THESE FOR PEACE OF MIND.
Cavan –
Works as advertised but the battery cover is horrible
So far these seem to be holding up after a few years. However, it starts chirping when the battery is dying (and odds are it will happen while you are sleeping at 2am). The battery cover has tiny screws to remove to gain access to the batteries, which is a really poor design. Upon replacement of the batteries, I just taped the cover on and ditched the screws.
P. Howard –
Get Them!
Great little devices. Works well as one detected a pipe leak under kitchen sink after just a few drops of water. Given location, it could have caused considerable damage if undetected. Alert sound is very loud, it just takes a while to figure where and what is going on. Loud enough to keep you searching. After my experience, bought a set for daughterâs house. Highly recommend.
Ronald Irene –
Great cheap accessory for home assistant
This was the cheapest water sensor I could find with long range and battery life. I use this with home assistant and the rtl plug-in. It’s so simple, robust, fast and easy!
Steve –
They are very sensitive and detect water very well.
I put these in my air conditioning secondary drain pans to let me know when there is water in the pan. I tested them before installing them and the work very well.
John Staif –
Water leak notification before it does damage
These send phone notifications and an audible alarm if you get water. The hub is required, these are add-on detectors. I bought the starter pack that had 3 detectors and the hub. I decided to add more to have them at all of the locations I want monitoring. They have worked perfectly.
Delroy –
Pairing these to my existing gateway was simple and painless; just hold the button on the gateway for 3 seconds until the light flashes, then press the button on the sensor. These sensors are perfect; they detect water both below and splashing from above, they have a loud audible alarm, plus alerts on your phone, and the batteries last a long time and are easy to change. They support Alexa, so you can have Alexa announce when a leak is detected. They also support IFTTT, so you can create even more advanced automations like automatically turning off a water valve when a leak is detected.
Cliente de Amazon –
El producto no se vincula con la aplicación. Y al ser un producto de un tercero y no ser de un proveedor oficial de la marca, govee no te brinda el soporte.
Rosevear Creations –
I recently added the Govee Water Detectors 5 Pack to our workshop, and it’s been a game changer for us. These sensors are incredibly sensitive and immediately alert us to any leaks or drips with a loud 100dB alarm. This is crucial in our line of work, where we often deal with water and various chemicals. The adjustable audio alarm is a great feature, allowing us to set the volume to our preferred level. Having these detectors in our kitchen and bathroom areas gives us peace of mind, knowing that we’ll be promptly alerted to any water issues before they become major problems. This has already saved us from potential damage and ensures our work environment stays safe and efficient. Highly recommend!
Byron R. Nate –
I bought the Govee Gateway and 3 sensors PLUS this Govee 5 sensor package. Following the instructions for connecting the Gateway to my 2.4g WiFi worked perfectly. Installing the Govee Home app from the Google Play Store worked perfectly as well on my Samsung 22+ Android phone and the app found the Govee Gateway correctly. The 3 sensors that came with the Gateway are already paired to the Gateway. Each of the 5 extra sensors had to be paired to the Gateway using the instructions. Most paired and showed up on the “devices” menu in the Govee Home app, but a couple looked like they paired, but didn’t show up in the app. All I had to do was place those sensors on a wet rag to force the alarm and then they showed up in the app with the sensor ID in RED which you clear by clicking “Got it” to the warning, AND, then they showed up with all the other sensor devices currently paired to the Gateway.A word about the Sensor IDs for each sensor – format H5054_NNNN. The Senor IDs are unique for each sensor, but are not printed on the sensor, so I placed each sensor one at a time on a damp cloth to test it’s alarm which pops up in the Govee app with the sensor ID in RED. So I wrote the ID in felt pen on each sensor which allows you to identify which sensor is sensing water. I had no trouble using the APP to create four rooms – Main Bathroom, Utility Room, Kitchen and 2nd Bathroom, AND, then adding my labeled sensors in each room.I really like that the sensors use triple AAA batteries that will be easy to replace (I cannot say how long they’ll last since my 8 sensors are now only 2 weeks old). I also really like that when water is detected, the Govee app shows you which sensor is alarming and also sends an email warning to my defined email address. So far the system is working perfectly. 5 stars from me.
AW –
Ordered these as extras and installed under all the toilets and kitchen sink. Had installed 3 previously , basement and within sump pump barrel. One went into alarm during a long downpour , as the rain barrels overflowed causing water in the basement.. got the alarm on my iPhone within seconds. Dealt with the rain barrel overflow. Only a few drops in the basement..